Indoor LED strip, very bright! 30 LED's every 0.5 metres can be cut every 3 LED's if you need to shorten strip. Ideal for under cabinets, displays, bars, dolls houses etc... Requires 12v DC driver. You buy it by the metre or by 5 meter which is the longest continuous run recommended. Just solder on cables and connect to a 12v supply. Strong 3M adhesive backing will stick to most clean and dry surfaces. One metre uses only 4.8 watts of power!
Please contact us for further information.
- 1 Metre
- 4.8W Per Meter
Up to 1.5 Metres length = 8W Driver
Up to 6 Metres length = 30W Driver
Up to 10 Metres length = 50W Driver
Up to 20 Metres length = 100W Driver
Up to 30 Metres length = 150W Driver
Up to 50 Metres length = 250W Driver
Calculate the wattage by the length. i.e. 2 x 5M lengths of IP65 strip=10M x 3.8W = 38 Watts, Use a 50W driver (T-Driver-50W). The customer may prefer to use 2x drivers as it suits their installation (2x 30W Drivers would then be required).
Note: For longer runs using one driver, each 5M length needs to be run back separately and not joined together! This is to prevent voltage drop, (only 12 volt ) which will affect brightness.
Here is a list of pages that you might find usful.