IP65 Outdoor LED strip, 48 LED's per metre. Ideal for bathrooms, displays - indoors or out, bars, signs, hot tubs! Plug in connectors included to keep weatherproof and to allow extending. Simply peel off backing and stick to clean, dry surface using strong 3M adhesive tape. Requires 12V DC driver - there are two types, a 9 watt which will run up to 2.35 metres, and a 30 watt, which can power up to 7.5 metres. You can cut to size, and seal with a drop of glue!
- 5 Metre
- 3.8w Per Meter
Up to 2 Metres length = 8W Driver
Up to 7 Metres length = 30W Driver
Up to 13 Metres length = 50W Driver
Up to 26 Metres length = 100W Driver
Up to 39 Metres length = 150W Driver
Up to 65 Metres length = 250W Driver
Calculate the wattage by the length. i.e. 2 x 5M lengths of IP65 strip=10M x 3.8W = 38 Watts, Use a 50W driver (T-Driver-50W). The customer may prefer to use 2x drivers as it suits their installation (2x 30W Drivers would then be required).
Note: For longer runs using one driver, each 5M length needs to be run back separately and not joined together! This is to prevent voltage drop, (only 12 volt ) which will affect brightness.
Here is a list of pages that you might find usful.